Night Vision Goggles With Thermal: Fusion, Bridge or Clip-On, and What Each Costs in 2026

Quick answer: there are three ways to get night vision and thermal together. A fusion goggle blends both into one picture in both eyes; ours, the ELF-FB20 fusion binocular, starts at $7,799.95. A bridge setup puts a thermal over one eye and night vision over the other; a PVS-14 plus a Night Operators PREDATOR is $2,599.90, plus a $44.95 shoe for the PVS-14. A clip on thermal imager (COTI) adds a thermal outline to your night vision tube; a PVS-14 plus our Jerry-C Pro COTI is $4,798.95 bought apart.

THROUGH THE GOGGLE

ELF-FB20 fusion modes, one scene.

One eyepiece view of deer in a field, cycling through every fusion mode. Tap a mode to jump to it.

Night vision onlyILLUSTRATION

Illustration. White hot and fire: seen in maker footage, not in the manual.

"Night vision goggles with thermal" sounds like one product. It is really three different ways of putting heat and light amplification together, and the price spread between them is large. We sell all three, so this guide lays them side by side with live prices from 29 October 2026, and is honest about what each one is best at.

Can night vision goggles have thermal built in?

Yes. A fusion goggle has thermal built in and blends it into the night vision picture. It is the most complete option and the most expensive. The other two options get you most of the benefit by combining separate units.

All three solve the same problem. Analog night vision shows detail and terrain but can miss a still, warm animal in shadow. Thermal finds heat instantly but shows little texture. Together you get both. Our post on what thermal fusion is explains the idea in depth.

The bridge route: the PREDATOR beside your PVS-14, thermal in one eye and night vision in the other.

What is a fusion goggle and what does it cost?

A fusion goggle is a night vision binocular with a thermal sensor built in, which overlays or blends the heat picture into the night vision image in both eyes. Our ELF-FB20 fusion binocular starts at $7,799.95 and rises with the tube grade.

A person at night wearing a helmet with a PVS-14 and the PREDATOR thermal on a dual dovetail bridge
A fusion goggle: our ELF-FB20, two tubes and the thermal in one housing.
ELF-FB20 thermal fusion night vision binocular, front three quarter view
A fusion goggle blends thermal into the night vision picture. Store picture from the ELF-FB20 page.

What you get: one device, both eyes, depth perception from two tubes, and the heat outline right on top of the detail. What you give up: price, and the ability to split thermal and night vision into separate units for other jobs. The ELF-FB20 tube grades on 29 October 2026: FOM 1400 to 1550 at $7,799.95, 1600 to 1800 at $8,999.95, and 1800 to 1950 at $9,999.95; the 2000 to 2100 grade is not available right now.

What is a bridge setup?

A bridge setup holds a thermal monocular over one eye and a night vision monocular over the other on a dual dovetail bridge. Your brain merges the two pictures.

Our bridge setup comes as the night vision and thermal fusion kit, with a dual dovetail bridge and a G24 mount.

The PVS-14 bridged with the HEAT thermal monocular
A bridge setup: the HEAT thermal monocular bridged with a PVS-14, seen from above.
PREDATOR thermal and PVS-14 night vision on the dual dovetail bridge, front view on black
Real photo, cleaned up with ChatGPT.

It is the best value of the three. The PREDATOR ($749.95) includes the dual dovetail bridge free on early bird orders while the launch window lasts, so a PVS-14 STANDARD (FOM 1400 to 1550, $1,849.95) plus a PREDATOR is $2,599.90. Each unit still works alone, and the PREDATOR also works handheld and on its own on a helmet. The PVS-14 needs a dovetail shoe to sit on the bridge: the STANDARD shoe is $44.95, sold on its own. The PRO housing, from $1,849.95, takes a different shoe that is not on sale yet, so the STANDARD is the one to bridge today. Our thermal and night vision together guide walks through the setup. We also sell a PVS-14 plus HEAT plus bridge kit at $2,349.95 (FOM 1400 to 1550) with our fixed lens entry thermal.

What is a clip on thermal imager?

A clip on thermal imager, or COTI, clips onto the front of your night vision tube and projects a thermal outline into the night vision picture. You see heat and detail in the same eye.

Related: clip on thermal for night vision, explained.

The Jerry-C Pro COTI clipped onto a PVS-14 night vision monocular
A clip-on thermal imager: our Jerry-C Pro COTI on a PVS-14.
Jerry-C Pro COTI clip on thermal, front three quarter view on white
A COTI clips onto the night vision objective lens. This is our Jerry-C Pro. Store picture from the Jerry-C Pro COTI page.

Our COTI is the Jerry-C Pro COTI, with a 640 sensor at 12 micron pitch, made for the PVS-14 and PVS-31, at $2,949. With our lowest priced PVS-14 on sale, the STANDARD at FOM 1400 to 1550 ($1,849.95), the two come to $4,798.95 at list prices. It sits in the middle: closer to fusion than a bridge, because the heat is drawn into the same eye, and well below the price of a fusion binocular. Read what a COTI is and COTI vs fusion goggles for more.

Which is right for you?

Night vision with thermal: three paths (Night Operators live prices, 29 October 2026)
Path How the heat shows Example setup Price Best for
Bridge Thermal in one eye, night vision in the other PVS-14 STANDARD plus PREDATOR, plus the shoe $2,644.85 Best value, flexible, each half works alone
Bridge, entry thermal Same, fixed lens thermal PVS-14 STANDARD plus HEAT plus bridge kit $2,349.95 Lowest cost analog plus thermal
Clip on (COTI) Thermal outline inside the night vision picture PVS-14 STANDARD (FOM 1400 to 1550) plus Jerry-C Pro COTI $4,798.95 at list prices Heat and detail in the same eye
Fusion goggle Blended in both eyes ELF-FB20 From $7,799.95 One device, both eyes, depth
  • You want the most for the money, or already own a PVS-14: the bridge. If you own the PVS-14, the PREDATOR alone is the upgrade.
  • You want heat and detail in one eye, and keep your other eye free: a COTI.
  • You want the best combined picture in both eyes and will pay for it: a fusion goggle.

Can you start with one and move to another later?

Yes, and the bridge is the easiest place to start. Everything in it keeps its value: the PVS-14 works alone, and the PREDATOR works alone, handheld, on a helmet or ahead of a day optic.

If you later move to a dual tube night vision binocular, the thermal still has its handheld and helmet roles. Our best dual tube night vision guide covers that next step, and is thermal worth it if you own night vision? helps if you are unsure whether to add heat at all.

Is digital an option?

Yes, at a much lower price. Our HEAT and VIPER bridge kit pairs a thermal monocular with a digital night vision monocular on one bridge for $749.95. It is not analog night vision, so the night vision half needs infrared light in very dark conditions, but as a first pair it is the simplest way in. Read what the HEAT and VIPER bridge kit is.

The HEAT thermal and VIPER digital night vision monoculars bridged on a head strap
The digital route: our HEAT thermal and VIPER digital night vision monoculars bridged on a head strap.

Going deeper: night vision binoculars with thermal, what an ENVG is and what civilians buy instead, and the ELF-FB20 guide.

Frequently asked questions

Can night vision goggles have thermal?

Yes. A fusion goggle has thermal built in and blends it into the night vision picture. You can also bridge a thermal beside a night vision monocular, or clip a thermal imager onto a night vision tube.

How much do thermal fusion goggles cost?

Our ELF-FB20 fusion binocular starts at $7,799.95 for the FOM 1400 to 1550 grade and goes to $9,999.95 for 1800 to 1950, at live prices on 29 October 2026.

What is the least costly way to get night vision and thermal together?

With analog night vision, a bridge. Our PVS-14 plus HEAT plus bridge kit is $2,349.95 at FOM 1400 to 1550, and a PVS-14 STANDARD plus the PREDATOR is $2,599.90, plus the $44.95 PVS-14 shoe.

What is the difference between a COTI and fusion?

A COTI clips onto a night vision tube and draws a thermal outline into that one eye's picture. A fusion goggle has thermal built in and blends it in both eyes.

Can I add thermal to my PVS-14?

Yes. Put a thermal beside it on a dual dovetail bridge, such as the PREDATOR, which comes with the bridge free for early bird orders, or clip a COTI onto its objective lens. The PVS-14 needs a dovetail shoe for the bridge.

The bridge route, with the bridge free for early bird orders while the launch window lasts: the PREDATOR beside your PVS-14, thermal in one eye and analog in the other. Night Operators PREDATOR, $749.95.

Shop the PREDATOR, $749.95

256 x 192 sensor, 25 mK, a true 60 Hz picture, with the dual dovetail bridge free for early bird orders while the launch window lasts.

Back to blog