Military Night Vision Goggles: What Troops Use and What You Can Buy

By Night Operators Staff Team
Published: November 5, 2026

Quick answer: Military night vision goggles are analog image intensifier devices in four shapes: the single tube AN/PVS-14 monocular, the dual tube binocular family (AN/PVS-15 through AN/PVS-31A), the four tube GPNVG-18 panoramic goggle, and the newest fused goggles (ENVG-B) that blend a tube with a thermal picture. The tubes inside are Gen 3. A civilian can buy the same four shapes with Gen 2+ tubes direct, without a dealer chain: our PVS-14 monocular is $1,849.95, the PVS-31 PRO dual tube is $3,599.95 and the OPNVG-18 quad, complete with 4 tubes, starts at $10,999.95 built to order. None of ours is issued, certified or contract equipment, and we never say otherwise. They are the same form factors, bought the direct way.

Search "military night vision goggles" and you get two kinds of page: surplus listings with no spec sheet, and military tech explainers that never say what a civilian can actually buy. This guide does both halves honestly. First, what the services issue and what each goggle is for. Second, the civilian path: which of those shapes you can own today, what tube you get, and what it costs direct. We sell the civilian versions, so we will be plain about where they match the issued article (shape, mounting, how you use them) and where they do not (tube generation, contracts, certification).

The PVS-31 PRO dual tube night vision binocular on a black background
The dual tube binocular shape, the form factor behind the AN/PVS-31 family: ours is the PVS-31 PRO, Gen 2+, with articulating pods and a helmet battery pack.

What night vision goggles do militaries use?

The names below are US designations, because the US naming system (AN/PVS and so on) has become the vocabulary of the whole market. NATO partners issue the same or similar patterns. The facts about each come from the Night-vision device entry on Wikipedia and the AN/PVS-14 entry, both read on 5 November 2026.

Related: the night vision goggles Navy SEALs use, and the civilian quad.

Related: what the ANVIS-9 aviator goggle is and what to buy instead.

AN/PVS-14: the single tube monocular

The AN/PVS-14 is in widespread use by the United States armed forces and NATO allies. It is a single Gen 3 tube over one eye, with a 40 degree field of view, worn on a helmet through a J-arm and a mount or used in the hand. One eye amplified, one eye dark adapted. It is the most common night vision device in military service and the one most civilians start with, for the same reasons: light, simple, flexible.

The dual tube binoculars: AN/PVS-15, AN/PVS-21, AN/PVS-23, AN/PVS-31A

The binocular night vision device (BNVD) family puts two tubes in one housing, one per eye, for depth perception and less eye strain over a long night. The AN/PVS-31A is the current pattern: lighter than the PVS-15, with articulating tube pods and a battery pack worn on the back of the helmet. This is the goggle in most of the recent photos.

GPNVG-18: the four tube panoramic goggle

The Ground Panoramic Night Vision Goggle uses four tubes, two forward and two angled out, to widen the view to about 97 degrees against the 40 degrees of a PVS-14. It was derived from an aviation panoramic goggle and is issued to special operations units. It is heavy, battery hungry and expensive, and it is also the goggle everyone recognises.

ENVG-B and the fused goggles

The Enhanced Night Vision Goggle Binocular (AN/PSQ-42 and AN/PSQ-44) blends an image intensifier tube with a thermal camera in one picture, so the wearer sees the scene from the tube and the heat of people and animals from the thermal at the same time. In April 2024 the US Army placed a large production order for the ENVG-B under a programme expected to run for ten years. Fusion is where issued night vision is heading, and it is also available to civilians in simpler forms, which we cover below.

Clip on thermal: AN/PAS-29 COTI

The clip on thermal imager attaches to the front of a PVS-14 or a binocular and overlays heat on the tube picture. It is the lower cost way to add fusion to goggles a unit already owns.

How did military night vision goggles get here?

In about fifty years, in four steps. The first goggle issued in numbers was the AN/PVS-5 of the early 1970s: two Gen 2 tubes in a mask over the face, first used by helicopter crews. The AN/PVS-7 of the 1980s used one tube split to both eyes through a prism, which needed fewer tubes per goggle but gave no depth perception. The AN/PVS-14 of the 1990s went to one tube over one eye, light enough to wear all night and still the most common goggle in service. Dual tube binoculars then came back in lighter form, ending in the PVS-31A, and fused tube plus thermal goggles such as the ENVG-B are the newest step. The longer story, back to the first image converter tube of the 1930s, is in who invented night vision.

Each step made the goggle lighter, wider or easier to use, and every one of those shapes is still around. That is why the civilian market sells the same four shapes today, and why the names are military codes.

What do military night vision goggles cost the government?

Contract prices are not public in a form you can shop against, and the numbers that circulate are for Gen 3 tubes, government contracts and a dealer chain in between. What matters for a buyer is the structure: the military pays for a Gen 3 tube with minimum specs written into a contract, a certified housing, training, spares and a supply chain. A civilian who wants the same shape does not need most of that, and that is the whole reason our prices look the way they do.

What are the civilian versions, and how do they differ?

The same four shapes exist for civilians. The honest differences are the tube generation, the paperwork and the price.

Issued goggle vs the Night Operators civilian version
Shape Issued article Our version Price direct
Single tube monocular AN/PVS-14, Gen 3 PVS-14, Gen 2+ autogated white phosphor, 40 degree (STANDARD) or 50 degree (PRO) view, G24-pattern mount and J-arm in the box $1,849.95 STANDARD, $1,884.95 PRO
Dual tube binocular AN/PVS-31A, Gen 3 PVS-31 PRO, two Gen 2+ tubes, 50 degree view per eye, articulating pods, helmet battery pack, G24-pattern mount in the box $3,599.95
Four tube panoramic GPNVG-18, Gen 3 OPNVG-18, complete with 4 Gen 2+ tubes, built to order from $10,999.95
Fusion ENVG-B, tube plus thermal in one goggle PVS-14 bridged with the HEAT thermal, one per eye; or the Jerry-C Pro COTI clip on for the PVS-14 or PVS-31 PRO $2,349.95 for the PVS-14 + HEAT + bridge kit; the Jerry-C Pro is $2,949.00

Three things are true of every row. The shape, the mounting and the way you use it match the issued pattern, which is why the training videos and the accessories carry over. The tube is Gen 2+, not Gen 3: a modern autogated Gen 2+ tube gives up some performance on the darkest overcast nights and very little under a moon, and we publish the measured figure of merit of every tube we ship rather than a generation label. And nothing we sell is issued, certified, mil spec rated or part of any contract. We build to the same housing patterns and sell the direct way. The comparison against the real AN/PVS-31 is spelled out in PVS-31 PRO vs AN/PVS-31.

The PVS-14 night vision monocular, three quarter front view
The single tube monocular shape: our PVS-14, Gen 2+, with the helmet mount and J-arm included.

Is Gen 2+ good enough if the military uses Gen 3?

For what a civilian does at night, yes, and here is the plain version of why. The mechanism is identical: a photocathode, a microchannel plate, a phosphor screen. Gen 3 uses a more sensitive photocathode, which earns its keep when there is almost no light at all: overcast, no moon, under trees. Under starlight, a quarter moon or sky glow from a town, a measured Gen 2+ tube in the 1400 to 2000 figure of merit range gives a picture whose gap from Gen 3 is far smaller than the price gap. That is also why the issued units cost what they do: the contract buys the last few percent on the worst nights, plus certification and support a civilian never uses. If your nights are mostly the darkest kind and you have the money, a dealer Gen 3 is a rational buy. If they are not, you are paying for headroom. A 2026 blind test by 4MR Ranch (Kyle's own test, of units that were not ours) shows the pattern: a 1619 FOM Gen 2+ tube got the edge for sharpness under a full moon, and a 2059 FOM Gen 3 tube won clearly in a dark room. The side by side is in Gen 2 vs Gen 3 night vision, and the single tube choice in PVS-14 Gen 3 vs Gen 2+: which PVS-14 should you buy.

Can a civilian legally buy military style night vision?

In the United States, owning and using night vision is legal for civilians; what is regulated is exporting it, because image intensifier tubes fall under US export rules. Hunting rules are set state by state and are a separate question. The complete picture, including why image intensifier tubes fall under export control, is in can civilians own night vision goggles and what ITAR means for night vision. None of this is a reason to avoid buying; it is a reason to buy from a seller who handles it properly.

Related: what military surplus night vision really is, and what it hides.

Which military shape should you buy as a civilian?

  • A first unit, most people: the single tube monocular. The PVS-14 at $1,849.95 does what the issued PVS-14 does on a helmet or in the hand, with the mount and J-arm already in the box. Pick the PRO housing for a 50 degree view if you want the wider picture.
  • Two eyes, moving over ground: the dual tube. The PVS-31 PRO at $3,599.95 is the PVS-31 shape with two Gen 2+ tubes, articulating pods, a helmet battery pack and a 50 degree view per eye where the issued goggle has 40. Depth perception is the whole reason to spend the extra, and PVS-14 vs PVS-31 helps you decide if you need it.
  • The widest view, no compromise on shape: the quad. The OPNVG-18, complete with 4 tubes, from $10,999.95, built to order. Read the quad nods buying guide first; four tubes are heavy and most people are happier with two.
  • Fusion: start with a PVS-14 and HEAT thermal on a bridge ($2,349.95 as a kit), one eye each. It is the civilian way to get what the ENVG-B does, and what thermal fusion is explains the trade offs.

Our pick: the PVS-31 PRO dual tube, FOM 1400 to 1550, at $3,599.95: the PVS-31 form factor with two new Gen 2+ autogated white phosphor tubes, a 50 degree view per eye, articulating pods, the helmet battery pack and a free G24-pattern mount. PVS-31 PRO night vision binocular, $3,599.95. Free G24 mount, free US shipping, duty free to the USA. Start with one tube instead: the PVS-14 from $1,849.95.

Related: how the PVS-7 and PVS-14 differ, and which to buy.

The OPNVG-18 quad night vision goggle from the front, four tubes
The four tube panoramic shape: our OPNVG-18, complete with 4 tubes, built to order.

Mistakes to avoid

  • Buying "military surplus" with no sheet. A surplus tube can be twenty years old. Without a measured sheet you are buying a story. Every tube we ship comes with its own.
  • Believing "mil spec" on a listing means a contract. It usually means the housing pattern. Ask what the tube measures.
  • Starting with a quad. The photos are great; the neck strain is real. Most people are better served by a dual tube or a monocular first.
  • Skipping the counterweight. Issued dual tube and quad setups are normally worn with one on the back of the helmet. So should yours be.

Frequently asked questions

What night vision goggles does the US military use?

The AN/PVS-14 single tube monocular, the AN/PVS-15 to AN/PVS-31A dual tube binoculars, the GPNVG-18 four tube panoramic goggle for special operations, and the fused ENVG-B that combines a tube with thermal. All use Gen 3 image intensifier tubes.

Can civilians buy military night vision goggles?

Civilians can buy the same four shapes with Gen 2+ or Gen 3 tubes; owning night vision is legal in the United States and what is regulated is export. Night Operators sells the PVS-14, PVS-31 PRO and OPNVG-18 shapes direct with Gen 2+ tubes. They are not issued or certified equipment.

What is the difference between military and civilian night vision?

The tube generation (Gen 3 on contract versus Gen 2+ or Gen 3 on the civilian market), the certification and support that come with a contract, and the price. The housings, mounts and the way you use them are the same patterns.

What are the four tube night vision goggles called?

The GPNVG-18, the Ground Panoramic Night Vision Goggle, which gives about a 97 degree view from four tubes. Our civilian version is the OPNVG-18, complete with 4 tubes, built to order from $10,999.95.

Is Gen 2+ night vision good enough compared with military Gen 3?

For moonlit and typical rural nights the gap is small, at a fraction of the price: in a 2026 blind test by 4MR Ranch, of units that were not ours, a 1619 FOM Gen 2+ tube got the edge for sharpness under a full moon against a 2059 FOM Gen 3 tube in an identical housing. Gen 3 pulls ahead on the darkest overcast nights and under heavy tree cover.

What are military night vision binoculars?

Dual tube goggles with one tube per eye, such as the AN/PVS-31A. They give depth perception and less eye strain than a monocular. The civilian equivalent from Night Operators is the PVS-31 PRO at $3,599.95 with a 50 degree view per eye.

The military shapes are the right shapes: they were chosen by people who spend whole nights in the dark. What a civilian does not need is the contract behind them. Every Night Operators analog unit is new, autogated, white phosphor, sold by measured tier with its QC sheet in the box, a free G24-pattern mount, free US shipping and no duties to the USA. See the PVS-31 PRO, $3,599.95

Zurück zum Blog