How to Read a Thermal Spec Sheet in 5 Minutes (NETD, Pixel Pitch, Hz, Display, Lens)

Quick answer: read five numbers, in this order: sensor resolution and pixel pitch (how much detail), lens focal length and field of view (how wide and how far), NETD (how sensitive), refresh rate and latency (how smooth), and display (how sharp the picture looks to your eye). Then ask whether the range figures were measured on real units. The Night Operators PREDATOR sheet reads: 256 x 192 at 12 micron, 4 mm and 13 mm lenses, 25 mK, 60 Hz with 25 ms latency, and a 320 x 320 AMOLED.

Thermal listings are full of numbers, and not all of them matter equally. Some tell you what the unit will actually show you. Some are marketing. This guide gives you a five minute reading order for any thermal spec sheet, using our own PREDATOR sheet as the worked example, and points you to a deeper post for each number.

Which five numbers matter on a thermal spec sheet?

Sensor resolution with pixel pitch, lens focal length with field of view, NETD, refresh rate with latency, and display resolution. Together they tell you how much detail, how wide, how sensitive, how smooth and how sharp.

The five numbers, using the PREDATOR as the example (live listing, 29 October 2026)
Order Number What it tells you PREDATOR
1 Sensor resolution and pixel pitch How much detail the sensor can capture 256 x 192, 12 micron
2 Lens and field of view How wide you see and how far detail reaches 4 mm, about 42 degrees; 13 mm, 13.5 degrees
3 NETD How small a heat difference shows up 25 mK
4 Refresh rate and latency How smooth the picture is when things move 60 Hz, 25 ms
5 Display How sharp the picture looks to your eye 320 x 320 AMOLED, 1.54 inch

One thermal for the hand, the helmet and the bridge, with a second lens for distance.

What do sensor resolution and pixel pitch tell you?

Resolution is how many pixels the sensor has; pitch is the size of each one. Together with the lens, they decide how many pixels land on a target, which is what lets you see detail at distance.

Common sizes are 256 x 192, 384 x 288 and 640 x 480 or 640 x 512. A bigger sensor lets you use a longer lens without the view becoming narrow. A smaller pitch, such as 12 micron rather than 17 micron, puts more pixels on a target with the same lens. Our 12 vs 17 micron guide covers pitch.

What does the lens number tell you?

The lens focal length, in millimeters, sets the trade between width and reach. A short lens sees wide; a long lens sees far. The field of view figure tells you the same thing in degrees.

A quick check you can do yourself: sensor width in millimeters is pixels times pitch. For a 256 sensor at 12 micron that is about 3.07 mm. Divide by the focal length and you have the view width in radians, roughly. On the PREDATOR, 4 mm gives about 42 degrees and 13 mm gives 13.5 degrees. If a listing's field of view does not match its sensor and lens, ask why. Our 4 mm vs 13 mm lens guide shows what that difference looks like.

What is NETD and what is a good number in 2026?

NETD, in millikelvin (mK), is the smallest temperature difference the sensor can show. Lower is more sensitive. Many current sensors are rated under 40 or 50 mK; 25 mK and below is a sensitive sensor.

Sensitivity matters most when everything is close to the same temperature: fog, drizzle, a mild humid night, an animal in warm brush. A low NETD keeps contrast in the picture on those nights. Read our full NETD explainer.

Does 60 Hz matter?

Yes, whenever you pan or watch something move. A higher refresh rate updates the picture more often, so a running animal stays sharp instead of smearing. Latency, the delay between the world and the screen, matters for the same reason.

Thermal cores commonly run at 25, 30, 50 or 60 Hz. The PREDATOR runs a true 60 Hz at 60 frames per second with 25 ms latency. If a sheet gives no refresh rate, ask. Our thermal refresh rate guide explains what you see at each rate.

Is display resolution the same as sensor resolution?

No. The sensor captures the heat image; the display is the small screen inside the eyepiece that shows it to you. A sharp display makes the picture look cleaner, but it cannot add detail the sensor did not capture.

Watch for listings that lead with a big display number and bury the sensor size. A 1024 x 768 display on a 256 sensor is still a 256 picture, just drawn more smoothly. The PREDATOR uses a 320 x 320 AMOLED at 1.54 inch. Our sensor vs display resolution post explains the difference.

What do detection ranges really mean, and are they measured?

A detection range says how far away you can tell that something warm is there. It is not how far you can tell what it is. And many listings calculate ranges from a formula rather than measuring them.

  • Detection means you see heat. Recognition means you can tell its class, such as person or animal. Identification means you can tell exactly what it is. Each needs more pixels than the one before.
  • Calculated vs measured. A formula range assumes perfect conditions and a standard target. A measured range comes from real units in real conditions.
  • Our figures: the PREDATOR's ranges were measured on our production units, not copied from a lab sheet. With the 4 mm lens, a person at 100 m and a vehicle at 300 m; with the 13 mm lens, a person at 250 m and a vehicle at 600 m.

Read detection, recognition and identification for the full explanation.

What else is worth a glance?

  • Battery: type and runtime. The PREDATOR has an internal 1700 mAh battery, 4 to 5 hours, USB-C charging, and takes an optional user supplied 16340 cell for roughly 1.5 to 2 hours more.
  • Water rating: look for a stated IP rating if you work in the wet. We do not state one for the PREDATOR.
  • Recording: if you want it, check it is listed. The PREDATOR does not record.
  • Calibration: most units use a shutter that briefly freezes the picture to recalibrate. The PREDATOR calibrates automatically.
  • Warranty and returns: read them before you buy. The PREDATOR has a 3 month hardware warranty and a 14 day return window after delivery.

Read the sheet the same way every time and you will compare units fairly in five minutes. Our thermal monocular buyer's guide turns these numbers into a buying decision.

Worked example: how do two spec sheets compare side by side?

Here is the five number reading order used on two sheets at once. Sheet A is a made up but typical listing: 384 x 288 at 17 micron, a 25 mm lens, 50 mK, 30 Hz. Sheet B is the PREDATOR with its 13 mm lens: 256 x 192 at 12 micron, 25 mK, 60 Hz.

  1. Detail. Pixels times pitch gives the sensor width: A is 384 x 0.017 = 6.5 mm, B is 256 x 0.012 = 3.07 mm. A has more pixels, so on paper it holds more detail.
  2. Width and reach. Sensor width over focal length gives the view: A sees about 15 degrees across, B about 13.5. Now count pixels on a person about 0.5 m wide at 100 m: pixels across = (0.5 / 100) x focal length / pitch. A puts about 7 pixels on that person, B about 5. A common rule of thumb asks for about 2 pixels across to detect, about 8 to recognise and about 13 to identify, so by the formula A detects a person out to about 370 m and B to about 270 m. Our measured figure for B is 250 m, a little under the formula, which is normal: a formula assumes a perfect night.
  3. Sensitivity. A is 50 mK, B is 25 mK. On a humid night or in light fog, B keeps more contrast between an animal and the brush around it.
  4. Smoothness. A redraws 30 times a second, B 60. When you pan or something runs, B smears less.
  5. Display. Read it last. A sharper screen draws the picture more cleanly but adds no detail the sensor did not catch.

The honest result: A wins on reach and raw detail; B wins on sensitivity and motion. Which matters more depends on whether you mostly watch open ground from one spot or walk and scan as you go. Run the same sums on any two sheets and the marketing falls away.

Frequently asked questions

What specs matter most on a thermal monocular?

Five numbers: sensor resolution with pixel pitch, lens focal length with field of view, NETD, refresh rate with latency, and display resolution. Then check whether range figures were measured.

What is a good NETD for a thermal?

Lower is more sensitive. Many current sensors are rated under 40 or 50 mK; 25 mK and below is a sensitive sensor. The PREDATOR is rated at 25 mK.

Is 60 Hz important on a thermal?

Yes, when you pan or watch movement. A higher refresh rate keeps moving targets sharp. The PREDATOR runs a true 60 Hz with 25 ms latency.

Is display resolution the same as sensor resolution?

No. The sensor captures the heat image and the display shows it. A sharper display cannot add detail the sensor did not capture.

Are thermal detection ranges accurate?

Detection only means you can see that something warm is there, and many listings calculate ranges from a formula. The PREDATOR's ranges were measured on our production units.

A spec sheet with nothing to hide: 256 x 192 at 12 micron, 25 mK, a true 60 Hz with 25 ms latency, a 320 x 320 AMOLED, 4 mm and 13 mm lenses, and ranges measured on our own production units. Night Operators PREDATOR, $749.95.

Shop the PREDATOR, $749.95

256 x 192 sensor, 25 mK, a true 60 Hz picture, with the dual dovetail bridge free for early bird orders while the launch window lasts.

Back to blog