Bump Helmet for Night Vision: What Non Ballistic Means and What to Buy

By Night Operators Staff Team
Published: November 8, 2026

Real photo of a night vision binocular mounted on a green bump helmet outdoors

Quick answer: A bump helmet is a light, non ballistic helmet built to carry night vision: a shroud on the front for the mount, rails on the sides for lights and counterweights, and a shell that protects your head from knocks, branches and door frames, not from projectiles. For night vision that is all you need, and the shroud matters more than the shell. Our GEN II FAST SF bump helmet is that platform. The mount that goes on it comes free with every PVS-14, along with the J-arm, so the kit at $1,849.95 is helmet ready out of the box.

What is a bump helmet?

A bump helmet is a helmet shell with no ballistic rating, made to be a stable platform for the things you wear on your head at night. The shell is light, usually vented, and padded inside with an adjustable retention system so it sits still when you turn your head. On the front there is a shroud, a small plate with a standard three hole pattern that a night vision mount locks into. On the sides there are rails for a light, a strobe, a counterweight pouch or a headset. The word "bump" says exactly what it protects against: bumping your head on a branch, a beam, a car door or the ground when you trip in the dark with a goggle in front of your face.

Our helmet is the Night Operators GEN II FAST SF, and its product page is plain about what it is: a non ballistic bump helmet built as a mounting platform for night vision, not as protective armour. Front shroud for night vision mounting, side rails for lights, counterweights and headsets, adjustable retention and padding, memory foam pads with a rear dial, vented shell, and it is compatible with our G24 pattern mount. It is sold separately from the night vision, and it pairs with any of our units.

Our pick to put on it: the PVS-14 STANDARD, 1400 to 1550 FOM, $1,849.95. A Gen 2+ white phosphor tube with the L4 G24-pattern helmet mount and the J-arm in the box, so the whole stack from shroud to eyepiece is covered except the helmet itself. Free G24 mount, free US shipping, no extra fees on US orders.

What does non ballistic mean, and do you need a ballistic helmet?

Non ballistic means the shell is not rated to stop fragments or projectiles. A ballistic helmet is: it has a thick aramid or polyethylene shell, it weighs more, and it costs several times what a bump helmet does. The two usually carry the same shroud and the same rails, which is the point: the mount, the arm and the goggle do not care which shell they are bolted to. What they care about is a solid shroud and a helmet that does not wobble.

So for night vision, no, you do not need ballistic. You need a shell that fits, a real shroud, and rails for the counterweight. Buy ballistic if your job requires it. Buy bump if your nights are walking land, camping, airsoft and milsim, search work, or simply wanting both hands free in the dark. Most civilian night vision sits on a bump helmet, and the recreational default has been a bump shell for years. If you are weighing a helmet against a plain head strap at all, head mount vs helmet mount settles that first.

Is a FAST helmet the same as a bump helmet?

Not quite. People type both and often mean the same object, but the two words answer different questions. FAST is a shape and a family name. Bump is a protection level. "FAST helmet" tells you what it looks like; "bump helmet" tells you what it stops. A helmet can be both at once, and most FAST style helmets sold for civilian night vision are: FAST in cut, bump in rating. Our GEN II FAST SF is exactly that.

What does FAST stand for?

FAST stands for Future Assault Shell Technology. It began as an Ops-Core helmet design (Ops-Core is a Gentex brand) and its outline has been copied across the market. The look is easy to spot: a high cut that leaves the ears clear, rails along both sides, a shroud at the front for night vision, and holes in the shell for the shroud and rail bolts. Because the shape caught on, "FAST" is now used for almost any high cut helmet built to carry gear, whatever it is made of.

Is a FAST helmet bulletproof?

Only if it is a ballistic FAST helmet. The FAST shape comes in two kinds: ballistic shells, made of thick aramid or polyethylene and rated to stop fragments and projectiles to a stated level, and bump shells, which are not rated to stop anything but knocks. A FAST helmet is not bulletproof unless the maker states a ballistic rating for that exact helmet. Ours is non ballistic, and its page says so in the product name.

Ops-Core FAST vs a FAST style clone: what changes for night vision?

For night vision, three things matter and the badge is not one of them. First, the shroud: it should be solid, bolted through the shell and centred, because it holds the whole goggle. Second, the rails: they carry the counterweight that keeps your neck comfortable. Third, fit: pads and a retention dial that keep the shell still when you nod. A name brand FAST shell does all three well and costs several times more. A FAST style bump shell can do all three too, if the shroud and rails are real. Check those before the logo.

What is our FAST helmet?

The Night Operators GEN II FAST SF is a FAST cut, non ballistic bump helmet, $149.95. Its page lists what it is built for: a new NVG shroud and ARC rail design that accepts headsets and counterweights, memory foam padding, a lightweight composite shell with vents, two sizes (Medium for 55 to 59 cm, Large for 59 to 62 cm) and three colours (black, tan and ranger green). It was rebuilt from our original GEN I FAST helmet with a new shroud, a new rail system and better padding, and the page says it gives better blunt impact protection than the Gen I while still being non ballistic. It is the helmet only, with no night vision, and it ships on its own.

Which should a night vision buyer want, FAST or a plain round bump shell? The high cut keeps your ears clear for a headset or hearing protection on the rails, which is useful. But the shroud matters more than the cut. A FAST shaped shell with a flimsy plastic shroud is a worse night vision helmet than a plain shell with a solid one, because the shroud is the only thing holding a $1,849.95 tube in front of your eye.

The OPNVG-18 quad night vision goggle mounted on a helmet, helmet sold separately
A FAST cut helmet carrying a goggle on its front shroud. The helmet is sold separately from every goggle we sell.

What is the shroud, and why does it matter more than the shell?

The shroud is the small plate bolted to the front of the helmet with a three hole pattern inside it. A night vision mount hooks into that pattern and locks. The pattern is a standard, so a mount from one maker fits a shroud from another: in his night vision mount guide, Brass Facts put it as roughly "95 percent of helmets and 95 percent of mounts" fitting each other (Night Vision Mount Guide, Brass Facts, YouTube). That compatibility is why our L4 G24-pattern mount, the one in every PVS-14 and PVS-31 PRO box, drops into our own helmet and into the common shrouds on the market, and why the product pages list it as fitting standard helmet shrouds.

Check three things on any shroud. It should be solid, metal or a thick reinforced polymer, not a thin plastic plate. It should be bolted through the shell, not glued or screwed into foam. And it should sit flat and centred, because every adjustment on the mount assumes the shroud is square to your face. The full story of the mount that goes into it is in the L4 G24 mount explained.

What is the mount stack from shroud to goggle?

Four parts, in order, and most of them come in our box.

  1. The shroud on the helmet. Comes with the helmet.
  2. The G24 pattern mount. Locks into the shroud, flips up to stow the goggle above your brow, flips down to lock it in front of your eye, and adjusts fore and aft, height and tilt so the eyepiece sits where your eye actually is. Free in the box with the PVS-14 and the PVS-31 PRO. Sold on its own at $69.95 in polymer or $99.95 in aluminium for a second helmet or for the digital kits.
  3. The arm or shoe. A PVS-14 does not have a dovetail of its own, so it needs a J-arm: the J-arm screws to the monocular and carries the dovetail that slides into the mount. The PVS-14 J-arm is in the box. A PVS-31 PRO and our bridged digital kits have the dovetail built in, so they need no arm.
  4. The goggle.
The PVS-14 kit laid out: monocular, J-arm, G24-pattern mount, eyecup, caps, tools and printed sheets
The PVS-14 kit as it arrives: monocular, J-arm, L4 G24-pattern mount, eyecup, caps and the printed spec sheet. Add a helmet and the stack is complete.

That is the whole reason the PVS-14 kit is the easy answer to the helmet question: the two parts people usually have to hunt for and pay extra for, the mount and the arm, are already there. The step by step of putting the four parts together is in the night vision helmet setup guide, and the shopping list per device is in the helmet setup parts list.

Do you need rails and a counterweight?

Rails, yes, if only for the counterweight. A PVS-14 weighs 265 grams or less on its own, and with the J-arm and the mount in front of it, the whole load hangs well ahead of your forehead. For a short walk you will not care. After an hour your neck will, and the helmet will creep forward over your eyes. A counterweight pouch on the rear of the helmet, or a battery pack back there, pulls the balance point back to the middle of your head. The PVS-31 PRO ships with an AA x4 battery pack that does that job on a dual tube. How much weight to add and where it goes is in helmet counterweights for night vision.

Rails also carry a strobe for finding each other at night events, a small light, and a headset. None of that is needed on the first night. The counterweight is.

How do you size a bump helmet?

Measure around your head one inch above the eyebrows, at the widest part. The GEN II FAST SF comes in two sizes on its page: Medium for 55 to 59 centimetres and Large for 59 to 62 centimetres. If you measure 59 centimetres, or you wear a balaclava or a headset under the helmet, size up. Inside, the memory foam pads and the rear dial do the fine adjustment. A helmet that fits should stay put when you nod hard with the goggle flipped down, which is the test that matters: a goggle that bounces is a goggle you cannot see through.

What should you check before buying any helmet for night vision?

  • A real shroud, solid, bolted through, centred. This is the one thing you cannot fix later.
  • Rails on both sides, so a counterweight and a light have somewhere to go.
  • A retention dial and pads you can adjust in the dark with gloves on.
  • Honest wording. A helmet sold for night vision should say plainly whether it is ballistic or not. Ours says it is not.
  • Weight. Lighter is better on a bump shell; the goggle adds plenty.
  • Your size, measured, not guessed.
  • What comes in the goggle box. If the mount and arm are already included, the helmet is the only thing left to buy.
Ways to wear night vision, 2026
Platform What it is Protection Counterweight? Best for
Head strap Fabric harness, no shell None No place for one Short sessions, a digital monocular, trying it out
Bump helmet Light non ballistic shell with shroud and rails Knocks, branches, falls Yes, on the rear rails Almost every civilian night vision user
Ballistic helmet Rated shell with the same shroud and rails Fragments and projectiles, as rated Yes Jobs that require the rating

Who should buy what?

A digital monocular, short walks. A head strap is fine. Move to a bump helmet when you add a second monocular or a thermal, because the bridge gets heavy on a strap.

A PVS-14. The PVS-14 kit from $1,849.95 and the GEN II FAST SF bump helmet, $149.95 on its page. The mount and J-arm are in the PVS-14 box. Add a counterweight.

A PVS-31 PRO. The same helmet. The PVS-31 PRO brings its own L4 G24-pattern mount and an AA battery pack that doubles as the counterweight, and it needs no J-arm.

The PVS-31 PRO on its G24-pattern helmet mount
The PVS-31 PRO on its L4 G24-pattern mount, the part that locks into the helmet shroud.

A bump helmet is the right helmet for night vision: light, vented, a solid shroud, rails for the counterweight, and no ballistic rating you would be paying for and not using. Put a PVS-14 on it and the mount and J-arm are already in the box, so the kit at $1,849.95 is everything but the shell. Free G24 mount, free US shipping, no extra fees on US orders, direct from us. PVS-14 kit from $1,849.95

Need the shell? The GEN II FAST SF bump helmet is on the store in two sizes and three colours.

Frequently asked questions

What is a bump helmet?

A light, non ballistic helmet built as a platform for night vision: a shroud on the front for the mount, rails on the sides for lights, counterweights and headsets, and a padded, adjustable shell that protects your head from knocks, branches and falls. It is not rated to stop fragments or projectiles.

Do you need a ballistic helmet for night vision?

No. The mount, arm and goggle attach to the shroud, and a bump helmet carries the same shroud as a ballistic one. Buy ballistic only if your job requires the rating. For walking land, camping, airsoft and search work, a bump helmet is the right choice and far lighter.

Is a FAST helmet the same as a bump helmet?

FAST is a shape and a family name: the high cut helmet with rails and a front shroud. Bump is a protection level: non ballistic. A helmet can be both, and our GEN II FAST SF is FAST in cut and bump in rating. For night vision the shroud matters more than either word.

Is a FAST helmet bulletproof?

Only if it is a ballistic FAST helmet with a stated rating. FAST is a shape; it comes in ballistic shells and in non ballistic bump shells. Our GEN II FAST SF is a non ballistic bump helmet and is not bulletproof.

Will a G24 mount fit my bump helmet?

If the helmet has a standard three hole night vision shroud, yes. The L4 G24-pattern mount in every PVS-14 and PVS-31 PRO box locks into standard helmet shrouds, and it fits our GEN II FAST SF helmet. Check that the shroud is solid and bolted through the shell.

What comes with the PVS-14 for a helmet setup?

The L4 G24-pattern helmet mount and the PVS-14 J-arm are in the box, free, along with the monocular, a sacrificial lens, an eyecup and the printed spec sheet. The only part of the stack you add is the helmet itself, and a counterweight for long sessions.

How do I size a bump helmet?

Measure around your head one inch above the eyebrows at the widest point. Our GEN II FAST SF is Medium for 55 to 59 centimetres and Large for 59 to 62 centimetres. At 59 centimetres, or with a balaclava or headset underneath, size up, then use the rear dial and pads for the fine fit.

Back to blog