ELF-FB20 Fusion Binocular: Specs, Modes, Price and Who It Is For

Quick answer: The ELF-FB20 is our helmet mounted dual tube night vision binocular with a 640 x 512, 12 micron thermal sensor built in. Two analog Gen 2+ tubes give 40 degrees per eye, and the thermal is blended over both with under 30 ms of delay. It is from $7,799.95 at the 1400-1550 FOM grade on 4 November 2026, built to order, and ships to the USA and Canada.

THROUGH THE GOGGLE

ELF-FB20 fusion modes, one scene.

One eyepiece view of deer in a field, cycling through every fusion mode. Tap a mode to jump to it.

Night vision onlyILLUSTRATION

Illustration. White hot and fire: seen in maker footage, not in the manual.

This is the plain guide to our ELF-FB20 fusion binocular: what it is, every spec on the product page, what you see through it, what it costs, what is in the box, how it goes on a helmet, and when you should buy something else instead.

What is the ELF-FB20?

It is a dual tube analog night vision binocular with a thermal channel built into the bridge. Each eye looks through its own 18 mm Gen 2+ image intensifier tube. A 640 x 512 thermal sensor between the pods feeds a 1280 x 1024 OLED, and the heat picture is blended over the tube image. One goggle, one battery pack, nothing to clip on or line up.

Illustration: a field seen through the ELF-FB20 in Highlight mode, the hogs light up red
Illustration: a field seen through the ELF-FB20 in Highlight mode, the hogs light up red.

What are the ELF-FB20 specs?

ELF-FB20 specifications, from our product page (which follows the maker's spec sheet), read 4 November 2026
Spec ELF-FB20
Night vision Two analog Gen 2+ image intensifier tubes, 18 mm, one per eye
Night vision field of view 40 degrees per eye, 1x
Thermal sensor 640 x 512, 12 micron, 60 Hz
Thermal field of view 24 x 20 degrees
Fusion Highlight and Outline, under 30 ms delay, shown on a 1280 x 1024 OLED
Modes Highlight, Outline, or night vision only (thermal off)
Runtime About 8 hours with thermal on, about 80 hours night vision only
Power External pack for 2 x 18650 cells, on a coiled cable
Focus and diopter 250 mm to infinity, manual; diopter -4 to +2
Eye spacing and eye relief 55 to 72 mm; exit pupil distance 25 mm
Helmet interface L4 G24 pattern
Weight and size Under 540 g without the battery pack; 105 x 110 x 87 mm
Other Built in digital compass, adjustable gain, bright light protection, each pod shuts off when flipped up or turned on its side
Weather IP67, -40 C to +50 C
The ELF-FB20 from behind, showing the eyepieces
The ELF-FB20 from behind: the two eyepieces adjust for eye spacing from 55 to 72 mm.

What do you see through it?

With thermal on you see the tube picture with warm targets drawn on top, in Highlight (warm bodies filled in) or Outline (only their warm edges). With thermal off it is a plain dual tube Gen 2+ binocular with a 40 degree view per eye. The pictures below are illustrations from our product page, not photos through a real unit.

Illustration: view through the ELF-FB20: a person in brush shows as heat
A person in brush shows as heat while the tubes keep the terrain readable. Illustration from our product page, not a photo through a real unit.
Illustration: view through the ELF-FB20 on a trail at night: an animal on the path shows as heat
On a trail at night: an animal on the path shows as heat. Illustration from our product page, not a photo through a real unit.

For how the overlay works in general, see night vision thermal overlay explained.

How much is the ELF-FB20?

ELF-FB20 tube grades and prices on our product page, read 4 November 2026 (every grade is built to order)
Tube grade (FOM) Price
1400-1550 $7,799.95
1600-1800 $8,999.95
1800-1950 $9,999.95
2000-2100 Not available right now

The thermal layer is the same in every grade; the tube picture gets cleaner as the FOM rises. Most buyers start at 1400-1550: the thermal does the finding and the tubes give the scene. For context, the military fused binocular class sits far higher: the closest listing we found was the L3Harris BNVD-Fused, listed at gpnvgs.com as "Base Price From $45,188.00" and out of stock when we read it on 13 October 2026. Same class does not mean the same specifications or package.

What comes in the box?

The ELF-FB20 binocular, the external battery pack (it takes 2 x 18650 cells) with its coiled cable, a padded soft pouch and a hard shell carrying case.

What comes in the ELF-FB20 box: hard case, padded soft pouch, the binocular and the battery pack with its coiled cable
What comes in the ELF-FB20 box: hard case, padded soft pouch, the binocular and the battery pack with its coiled cable.

How does it go on a helmet?

The helmet interface is the L4 G24 pattern, the same pattern as our PVS-31 PRO mount. Check your helmet mounting interface before you order. If you need a helmet, the product page offers our Gen II FAST SF vented helmet (non-ballistic) as an add on for $149.95. The unit weighs under 540 g without the battery pack, so plan for the pack and a counterweight on the back of the helmet.

The ELF-FB20 from above, showing the helmet interface on top
The ELF-FB20 from above, showing the helmet interface on top.
Real photo of the ELF-FB20 on a green helmet outdoors
Real photo: the ELF-FB20 on a helmet.

How is it shipped, and what if it is not right for you?

It is built to order: the tubes are fitted and the unit is tested after you order, and it ships about 5 to 7 weeks from the order date. It ships to the USA and Canada only, duty free to the USA. Every order has a 14-day return window: defects reported within 14 days of delivery are repaired or replaced at our choice, and personal preference returns carry a 15% restocking fee. The hardware warranty is 3 months.

Who should not buy the ELF-FB20?

  • You already own our PVS-31 or PVS-14. The Jerry-C Pro clip-on adds heat to it for far less, $2,949.
  • You only want thermal. A standalone thermal like our PREDATOR at $749.95 is the simpler buy.
  • You want the widest night vision view. Our PVS-31 PRO gives 50 degrees per eye against 40 on the ELF-FB20.
  • You require Gen 3. The ELF-FB20 uses analog Gen 2+ tubes; it is not a Gen 3 product.

If you want both eyes and thermal in one sealed unit from day one, the ELF-FB20 is what we built. Still deciding? Read night vision binoculars with thermal and COTI vs fusion goggles.

Related: thermal fusion night vision: goggles, clip ons and bridges compared.

Frequently asked questions

What is the ELF-FB20?

A helmet mounted dual tube analog Gen 2+ night vision binocular with a built in 640 x 512, 12 micron thermal sensor. One goggle, one battery pack, nothing to clip on or line up.

How much is the ELF-FB20?

On 4 November 2026: 1400-1550 FOM $7,799.95, 1600-1800 FOM $8,999.95, 1800-1950 FOM $9,999.95, and the 2000-2100 FOM grade is not available right now.

Is the ELF-FB20 Gen 3?

No. It uses two analog Gen 2+ image intensifier tubes, 18 mm, one per eye. The thermal layer is digital and sits on top of the tube picture.

How long does the ELF-FB20 battery last?

About 8 hours with thermal on and about 80 hours with night vision only. The external pack takes 2 x 18650 cells and connects with a coiled cable.

How long until the ELF-FB20 ships?

About 5 to 7 weeks from the order date. It is built to order: the tubes are fitted and the unit is tested after you order. It ships to the USA and Canada only.

Two Gen 2+ tubes, 40 degrees per eye, a 640 x 512 thermal built in, battery pack, hard case and soft pouch in the box. See the ELF-FB20.

Shop the ELF-FB20

Zurück zum Blog