How to Run Thermal and Night Vision Together: PVS-14 + Thermal Bridge Setup

Quick answer: yes, you can run a PVS-14 and a thermal on one helmet. You need a dual dovetail bridge, a dovetail shoe on the PVS-14 (the angled J-arm will not work), and a thermal with a dovetail shoe. The Night Operators PREDATOR ($749.95) comes with the bridge free for early bird orders while the launch window lasts, so the parts you add are the PVS-14 and its shoe. Thermal finds the heat, the tube shows the detail.

Running thermal in one eye and an analog night vision tube in the other is one of the most useful setups you can put on a helmet. The thermal picks out a warm shape that the tube might miss in shadow or brush. The tube shows you the ground, the branches and the detail of what the thermal found. Your brain blends the two.

It is also simpler and far less costly than a fusion goggle. This guide covers the parts, the one part most people forget, and the setup, step by step. Prices are live as of 29 October 2026.

A person at night wearing a helmet with a PVS-14 and the PREDATOR thermal on a dual dovetail bridge
Worn at night: the PVS-14 and the PREDATOR side by side on the dual dovetail bridge. Picture made with Higgsfield from our real photo of both units.

Can you run a PVS-14 and a thermal on one helmet?

Yes. A dual dovetail bridge holds both on one helmet mount, one in front of each eye. Each unit keeps working on its own, so you can still take either off and use it alone.

This is often called a bridge setup or a "poor man's fusion". Unlike true fusion, the two pictures are not blended in one eye. Each eye gets its own clean picture, and your brain combines them. Many users prefer it that way. Our post on what thermal fusion is explains the difference, and thermal and night vision together covers when to use each.

The thermal half of the bridge setup, with the dual dovetail bridge free for early bird orders while the launch window lasts.

What bridge and shoes do you need?

You need four things: a helmet mount, a dual dovetail bridge, a dovetail shoe on the PVS-14, and a thermal with a dovetail shoe.

Parts for a PVS-14 plus PREDATOR bridge (live prices 29 October 2026)
Part Why you need it Price
PREDATOR CORE The thermal half, dovetail shoe built in $749.95
Dual dovetail bridge Holds both units on one mount Free with the PREDATOR on early bird orders while the launch window lasts ($179.95 on its own)
PVS-14 The analog night vision half From $1,849.95 for the STANDARD at FOM 1400 to 1550, the version that fits the bridge today
Dovetail shoe for the PVS-14 Lets the PVS-14 sit on the bridge $44.95 for the STANDARD shoe; see below
G24 style helmet mount Holds the bridge on the helmet $99.95 aluminum, $69.95 polymer, or the mount you already own

What is the part most people miss?

The dovetail shoe on the PVS-14. The bridge holds devices by a dovetail shoe, and the angled J-arm that many PVS-14s ship with will not fit it.

A J-arm holds the PVS-14 at an angle off a single mount. That is fine on its own, but on a bridge the PVS-14 has to slide in by a dovetail, side by side with the thermal. So the PVS-14 needs its own shoe:

  • PVS-14 STANDARD: the PVS-14 micro dovetail shoe assembly, $44.95.
  • PVS-14 PRO: a different shoe, because the PRO housing has a different footprint, and that shoe is not on sale yet. If you want a PRO on the bridge, email us before you order.

The shoe is sold on its own and is not bundled free. Add it to the same order as the PVS-14 so everything ships together. Not sure which shoe your PVS-14 needs? Email info@nightoperators.com before you order.

Which eye gets thermal?

Our default is the PREDATOR over the right eye and the PVS-14 over the left. Either way works, as long as you pick one and stay with it.

Some people put the analog tube over their dominant eye because it carries the detail they use to move and identify, and the thermal over the other eye to catch heat in their peripheral attention. Others do the reverse. Try both at home before your first night out. Our which eye for a PVS-14 guide helps you find your dominant eye.

How do you set the height and spacing so both images line up?

Set the overall height on the helmet mount first, then center each unit over its own eye. When it is right, you see two full round pictures that your brain merges into one view.

  1. Fit the shoe to the PVS-14 and slide both units into the bridge. Lock each side.
  2. Slide the bridge into the helmet mount and lower it into the viewing position.
  3. Raise or lower the mount until both eyepieces sit level with your pupils.
  4. Center each unit over its eye. If one picture is cut off at the side, that unit is too far in or out for your eye spacing; adjust it on the bridge if your bridge allows, or shift the mount left or right.
  5. Set the fore and aft distance so both pictures are full and sharp.
  6. Focus each one on its own: the PVS-14 objective and diopter, and the PREDATOR rear diopter.
  7. Turn the PREDATOR's screen brightness down to match the tube, so one eye is not dazzled.

Two units on the front of a helmet is real weight, so add a counterweight on the back. Our counterweights guide covers how much and where, and IPD fitting for dual tubes explains eye spacing in more depth.

What does the full setup cost?

Our PVS-14 PRO housing (from $1,884.95) needs a PRO shoe for the bridge that is not on sale yet, so the lowest bridge setup you can order today is $2,644.85 at live prices on 29 October 2026: the PREDATOR at $749.95, a PVS-14 STANDARD (FOM 1400 to 1550) at $1,849.95 and the STANDARD shoe at $44.95, with the bridge free in the PREDATOR box on early bird orders.

The parts above also come as one PVS-14 and PREDATOR thermal fusion kit.

Ways to get thermal and analog together (live prices 29 October 2026)
Setup How it works Price
PVS-14 STANDARD plus PREDATOR, bridged Thermal one eye, analog the other, two lenses on the thermal $2,644.85 with the shoe
PVS-14 STANDARD plus HEAT bridge kit Same idea with our fixed lens entry thermal, sold as one kit on the PVS-14 page $2,349.95 (FOM 1400 to 1550)
ELF-FB20 fusion binocular Thermal blended into a night vision binocular, both eyes From $7,799.95

If you already own a PVS-14, the PREDATOR alone, at $749.95, is the whole upgrade. Our PVS-31 vs PVS-14 and HEAT bridge post compares other ways to spend the same money.

Is it better than a fusion goggle?

For most people, a bridge setup is the better value. A fusion goggle is better if you want both pictures blended in both eyes and will pay several times more for it.

Related: night vision thermal overlay, with a price for each way.

  • Bridge wins on: price, flexibility (each half works alone), and a clean picture in each eye.
  • Fusion wins on: one blended picture in both eyes, depth from two tubes, and no learning curve of merging two different pictures.

Most people adapt to the bridge view within a few nights. Read can you bridge two PVS-14s for the related setup with two tubes.

Frequently asked questions

Can you bridge a PVS-14 with a thermal?

Yes. A dual dovetail bridge holds a PVS-14 over one eye and a thermal over the other on one helmet mount. Early bird PREDATOR orders get the bridge free while the launch window lasts.

What do I need to bridge a PVS-14 and a PREDATOR?

A helmet mount, the dual dovetail bridge (included with the PREDATOR), a dovetail shoe on the PVS-14, and the PREDATOR itself, which has its shoe built in.

Does the PVS-14 J-arm work on the bridge?

No. The angled J-arm many PVS-14s ship with does not fit the bridge. The PVS-14 needs a dovetail shoe. For the PVS-14 STANDARD that is the micro dovetail shoe assembly, $44.95; the PRO needs a different shoe, not on sale yet.

Is the PVS-14 dovetail shoe included with the PREDATOR?

No. The PREDATOR has its own shoe built in and comes with the bridge, but the PVS-14 shoe is a separate part: $44.95 for the PVS-14 STANDARD. Add it to the same order as the PVS-14.

How much does a PVS-14 and thermal bridge setup cost?

From $2,644.85 today: our PVS-14 STANDARD (FOM 1400 to 1550) at $1,849.95, the PREDATOR at $749.95 and the $44.95 shoe, bridge included on early bird orders. The PVS-14 PRO housing needs a PRO shoe for the bridge that is not on sale yet. If you already own a PVS-14, the PREDATOR alone is the upgrade.

Which eye should the thermal go on in a bridge setup?

Either, as long as you stay consistent. Our default is the PREDATOR over the right eye and the PVS-14 over the left.

The thermal half of the setup, with the dual dovetail bridge free for early bird orders while the launch window lasts: the PREDATOR, 25 mK, true 60 Hz, about 42 degrees of view on the 4 mm lens. Add it to the PVS-14 you already own, or buy both. Night Operators PREDATOR, $749.95.

Shop the PREDATOR, $749.95

256 x 192 sensor, 25 mK, a true 60 Hz picture, with the dual dovetail bridge free for early bird orders while the launch window lasts.

Retour au blog