Red Light vs IR With Night Vision: Which Headlamp Setting to Use

By Night Operators Staff Team
Published: November 12, 2026

Real view through a PVS-14 night vision monocular indoors with no IR light

Quick answer: With night vision on, use no light at all if the tube can see, a dim IR flood if it cannot, and red only when the goggle is flipped up and you are reading with your own eyes. Red light protects your bare eyes' night adaptation, but a night vision tube does not care what colour a light is, only how bright it is, so a red headlamp a few feet from your face blooms the image just like a white one. An IR flood is invisible to everyone around you and lights the scene for the tube. On a PVS-14 the tube sees by starlight and moonlight on its own; for the darkest corners you add a small IR light of your own.

Why does red light still bloom a night vision tube?

Because red is a colour and a tube does not see colour. An image intensifier takes every photon that reaches the front lens, visible or near infrared, and multiplies it into a brighter picture. A red headlamp is a bright source of photons at a wavelength the tube amplifies perfectly well. Point it at the ground three feet in front of you and the tube sees a brilliant patch with a halo around it, the gain drops to cope, and everything outside the patch goes dark. That is bloom. The same thing happens with white, green, amber or any other visible colour; red is not special to the tube.

Red is special to you. The light sensitive cells that handle your night vision, the rods, are nearly blind to deep red, so a red light lets you read a map or find a zipper without resetting the twenty minutes your eyes spent adapting to the dark. That is a real benefit, and it is why red headlamps exist. It just has nothing to do with the goggle. When the goggle is in front of your eye, your own adaptation does not matter; the tube is doing the seeing. When the goggle is flipped up and you are using your own eye, red earns its place.

Our PVS-14 is autogated, which means the tube protects itself from bright flashes and limits blooming, so a red light will not harm it. It will still wash out the picture while it is on. Our guide to IR illuminators covers what a tube does with light in more depth.

Our pick: the PVS-14 STANDARD 1400 kit at $1,849.95. A Gen 2+ analog tube that sees by ambient light with no illuminator at all, autogated so a sudden light does not hurt it, and manual gain to turn the picture down when someone else's light comes on. Mount and J-arm in the box.

When does a dim IR flood beat red?

Whenever the goggle is down and the scene is too dark for the tube on its own. A barn with the doors shut, the inside of a tent, a cellar, a forest floor under heavy canopy on a moonless night: these are the places a tube runs out of photons, and the answer is to add some the tube can see and nobody else can. An IR flood does exactly that. To your camp mates it is off. To your tube it is a floodlight.

Dim is the key word. A powerful IR beam at close range blooms a tube as badly as a white light, because again the tube only counts photons. The useful setting is a wide, weak flood that lifts the whole scene a little, not a tight bright beam that lights one spot. Many headlamps now ship with an IR mode; a dedicated small IR flood on the helmet rail is the next step up. Our guide to when you need an IR illuminator runs through the situations one by one.

The PVS-14 from the front, showing the objective lens
The front of the PVS-14. The objective lens collects whatever light is there, starlight and moonlight included; on the blackest nights a small IR flood adds light only the tube can see.
Headlamp settings with night vision: what each one does
Setting To a night vision tube To your bare eyes To people around you Use it when
White Blooms hard, washes the image Kills night adaptation for minutes Blinds anyone looking your way, seen for miles Only with the goggle up and nobody else about
Red, dim Still blooms up close, less at distance Keeps most of your adaptation Visible, but gentle at close range Goggle flipped up, reading or close work
IR flood, dim Lights the scene, little bloom if weak and wide Invisible (a faint red dot at the emitter on 850 nm) Invisible to bare eyes, obvious to any other tube or camera Goggle down, scene too dark for the tube
No light Best image under any moon or stars Fully adapted Nothing to see Most of the night, on a PVS-14

How do you keep camp mates happy?

By understanding that the two groups want different things. People without night vision want to keep their dark adapted eyes, so they hate white light and tolerate dim red. People with tubes want no visible light at all, because any colour blooms the image, and they are happy with IR. The settings that keep both groups friendly are, in order: nothing, then dim IR, then dim red pointed down and away, and white light only by agreement and with warning.

Two courtesies make it work. First, say "light" before you switch on anything visible, so tube wearers can flip up or look away; a flipped up goggle sees nothing and an autogated tube survives the rest. Second, keep IR floods pointed at the ground and off when you are facing someone wearing a goggle, because to their tube your IR flood is a headlamp in the face. The faint red glow at an 850 nm emitter is visible to bare eyes at close range, which is worth knowing in a tent; our guide to 850 nm vs 940 nm explains the glow and the trade with the quieter wavelength.

And if the camp has animals around it, remember that some of them notice 850 nm too. Do animals see IR light covers which ones.

What does the IR illuminator on our units do?

On the PVS-14, the product page does not list a built in illuminator, so plan as if there is none. The tube amplifies ambient light and needs no lamp under any moon or stars, which means nothing gives away your position. Inside a building, under thick canopy or in a cellar, add light the tube can see: a headlamp with an IR mode or a small IR flood on the helmet rail. The tube itself is autogated, with manual gain, so when someone's light does come on you turn the picture down rather than squint. Our two tube PVS-31 PRO does list a built in 850 nm illuminator, and its page calls it a backup only.

The VIPER digital night vision monocular on a head strap
The VIPER digital monocular. Its built in 850 nm illuminator is the main light source on dark nights, not a backup, because a digital sensor needs more light than a tube.

On the VIPER, the product page lists a built in 850 nm, 3 watt infrared illuminator. The VIPER is a digital sensor, and a digital sensor needs more light than an analog tube to make a picture, so on the VIPER the illuminator is the normal way to see on a dark night, not the exception. That is the honest difference between the two: a PVS-14 runs dark most of the time and borrows an IR light rarely; a VIPER lights up most of the time. Any 850 nm light, built in or added, is visible to every other night vision device and shows a faint red glow at the emitter. The HEAT thermal monocular on the same page needs no light of any kind, because it reads heat. Our guide to why digital needs IR explains the sensor side.

Can a red light stand in for an IR illuminator?

For the tube, partly. A tube amplifies visible red as well as infrared, so a dim red flood pointed well ahead of you does light a dark scene for the goggle, and some owners use one when their IR light is too weak to reach far. The catch is that everyone else sees it too, animals included, which throws away the whole point of seeing without being seen. Red is gentler on bare eyes than white, but it still shows you to everyone around you, where IR does not. So red works in a pinch on your own land; an IR light is the right tool. If the deeper question is whether to light the scene at all, our guide to passive vs active night vision covers when an IR light gives you away.

Which headlamp should you carry with night vision?

One with three things: a dim red mode for when the goggle is up, an IR mode for when it is down, and a lock so it cannot switch on white in your pack or on your head. Brightness matters less than the low end; a headlamp that cannot go dim enough is a bloom machine on either setting. Mount it on the helmet rail or wear it around your neck on a lanyard so it points at your hands, not at the horizon.

The Night Operators PVS-14 night vision monocular, three quarter front view
The PVS-14. Starlight and moonlight do the work; the headlamp stays off until the goggle is flipped up.

The order of use on a typical night out: walk in with the goggle down and every light off. In camp, goggle down, cook and set up by moonlight; if the tent is black inside, a touch of IR. Need to read a label or tie a knot with your own eyes? Flip the goggle up, dim red, flip it back down, red off. White light only for a first aid problem or a search, and warn everyone first. Our guide to night vision for camping and backpacking walks a whole evening this way.

Who should buy what?

  • Camper who wants to see all night without a light: the PVS-14 kit at $1,849.95. Passive on starlight, about 40 hours on one AA cell; add a small IR flood for black interiors.
  • Camper who wants a lower cost start and does not mind running an illuminator: the VIPER KIT at $249.95, with its built in 850 nm, 3 watt IR.
  • Someone who mostly wants to find animals around camp: the HEAT and VIPER bridge at $749.95: heat needs no light at all, and the VIPER adds detail when you need it.
  • A group where some have night vision and some do not: whoever has the PVS-14 runs dark; everyone else runs dim red; IR floods pointed at the ground.

Mistakes to avoid

  • Red headlamp on with the goggle down. It blooms the image. Red is for the goggle up position.
  • A bright IR beam up close. Photons are photons; a tight IR beam at three feet looks like a torch to the tube. Wide and weak.
  • Forgetting that IR is visible to other tubes. Anyone else with night vision, and most security cameras, see your flood plainly.
  • Reaching for IR before the tube needs it. On a PVS-14 an IR light is the backup. Let the tube work first; most nights it needs no help.
  • A headlamp with no lock. A white light that switches on by itself in your pack is the worst light in this whole article.

Red for your eyes, IR for the tube, and nothing at all whenever the night has any light in it. A PVS-14 runs dark on starlight with no lamp at all, and the kit at $1,849.95 ships with the L4 G24-pattern mount and the J-arm free. Free US shipping, direct from us. PVS-14 kit from $1,849.95

Frequently asked questions

Does red light affect night vision goggles?

Yes. A night vision tube amplifies brightness, not colour, so a red headlamp up close blooms the image the same way a white one does. Red protects your own dark adapted eyes, which only matters when the goggle is flipped up and you are looking with your bare eye.

Should I use red light or IR with night vision?

IR with the goggle down, red with the goggle up. A dim IR flood lights the scene for the tube and stays invisible to the people around you; red is for reading or close work with your own eyes. With any moon or starlight, a PVS-14 needs neither.

Can other people see an IR illuminator?

Bare eyes see only a faint red glow at an 850 nm emitter at close range. Anyone wearing night vision, and most cameras, see the whole beam clearly. Keep floods dim, pointed at the ground, and off when facing another goggle wearer.

Does the PVS-14 have a built in IR illuminator?

Its product page does not list one, so plan as if it has none. The tube sees by starlight and moonlight on its own, and for black interiors, cellars and heavy canopy you add a headlamp with an IR mode or a small IR flood on the helmet rail. Our PVS-31 PRO page does list a built in 850 nm illuminator, as a backup only.

Why does the VIPER use its IR illuminator more than the PVS-14?

The VIPER is a digital sensor, and a digital sensor needs more light than an analog tube to form a picture, so its built in 850 nm, 3 watt illuminator is the normal way to see on a dark night. The PVS-14's tube sees by starlight and moonlight and needs an added IR light only rarely.

What headlamp settings work best with night vision?

A dim red mode for when the goggle is flipped up, an IR mode for when it is down, a low enough minimum brightness that neither blooms the tube, and a lock so it cannot switch on white by accident. Point it at your hands, not the horizon.

How do you use lights around people with night vision?

Say "light" before switching on anything visible so goggle wearers can flip up or look away, keep IR floods pointed down and off when facing a goggle, and use dim red rather than white when someone without night vision needs to see. White light only by agreement.

Retour au blog