PVS-14 Kit: What Comes in the Box and What You Add (2026)

Quick answer: What comes with a PVS-14 from us is five things on the product page's packing list: the PVS-14 monocular, a dovetail J-arm, a metal G24-pattern helmet mount, an eyecup and an objective cap, plus a printed QC sheet with your tube's own measured numbers. That is a helmet ready kit from $1,849.95. What is not on the list: a battery (it takes one AA), a helmet, a counterweight, a sacrificial window and a case. Many dealers sell the monocular bare and the mount and arm separately; a full dealer helmet kit with a Gen 3 tube, helmet and IR light was $5,999.00 at Ironclad Sentry on 5 Nov 2026.

Below: the box item by item, a table of our box next to a dealer helmet kit and a bare dealer unit, what you need before the first night, and what to add first.

PVS-14 kit, from $1,849.95. Gen 2+ autogated tube with manual gain, IP67, and everything to put it on a helmet: the J-arm and the G24-pattern mount, free in the box. Each unit ships with its own printed QC sheet. In stock tiers leave our US warehouse in 1 to 2 business days. See the PVS-14 kit

The Night Operators PVS-14 night vision monocular mounted on a helmet, lit low on a black background
The Night Operators PVS-14 night vision monocular mounted on a helmet.

What comes in a PVS-14 kit?

The packing list on our product page, word for word in plain terms:

  • The PVS-14 monocular with its Gen 2+ autogated tube, at the FOM tier you picked.
  • A dovetail J-arm (PVS-14 only). The arm that connects the monocular to a helmet mount or a head mount.
  • A metal G24-pattern helmet mount. The flip mount that sits on a helmet shroud. It is an L4 G24-pattern mount, not a Wilcox; our page says so too.
  • An eyecup (1 to 2, per the list).
  • An objective cap (1 to 2, per the list).
  • The printed QC sheet. The page says every unit ships with its own printed factory QC spec sheet with that tube's measured values. It is the most important paper in the box: it is your record of what you bought, for the return window, for any claim and for resale.

User manuals for the PVS-14 STANDARD and PRO are on our website. How to read the QC sheet line by line is in how to read a night vision QC sheet, and why we ship one per tube is in why per-tube QC sheets matter.

Does a PVS-14 come with a helmet mount?

Ours does: the G24-pattern helmet mount and the J-arm are both in the box at every tier, at no extra cost. That matters because a lot of PVS-14 listings sell the monocular alone, and the mount and arm are then a second purchase. Our product page's own comparison lists several dealer PVS-14s as "Mount + J-arm sold separately".

The mount fits standard three hole helmet shrouds; our page names Wilcox, Norotos and Ops-Core shrouds as compatible. What the G24 pattern is and why it matters is in what the L4 G24 mount is.

Not sure what a shroud is, or whether your helmet has the right one? Our guide what is an NVG shroud shows how to check before you buy.

The PVS-14 with its J-arm, G24-pattern helmet mount, eyecup and objective cap
The parts that put a PVS-14 on a helmet: the J-arm (bottom right) and the G24-pattern mount (top right). Both are in our box.

What does a dealer PVS-14 kit cost, and what is in it?

Here is our box next to two common ways dealers sell a PVS-14: a full helmet kit, and a bare unit. Read on 5 Nov 2026.

Item Our PVS-14 kit ($1,849.95) Dealer helmet kit: Armasight PVS-14 Gen 3 Pinnacle Premium Kit ($5,999.00 sale at Ironclad Sentry) Bare dealer unit: AGM PVS-14 NW2 ($2,795.00 at Focus Camera) If you buy it separately
Tube Gen 2+ autogated, measured FOM tier from 1400 Gen 3, 2000 FOM minimum (listing) Gen 2+ Level 2 (listing) n/a
Helmet mount yes, G24-pattern, metal yes, a G95 mount check the listing typically sold separately
J-arm yes yes check the listing typically sold separately
Helmet no (our FAST SF vented helmet is a $149.95 add on) yes, a Team Wendy bump helmet no add on
IR illuminator no yes, a Watchman IR light and 30 mm ring mount see listing add on
Bag or case not on our packing list yes, a helmet bag see listing add on
Sacrificial window not on our packing list not listed not listed $27.20 sale at AGM Global Vision
AA battery not on our packing list not listed not listed 8 pack lithium AA, $20.99 at Walmart (search listing)
Per-tube QC sheet yes, printed, your tube not listed not listed cannot be bought later

Read the table two ways. The dealer helmet kit is a bigger box: it adds a helmet, an IR light and a bag, and it carries a Gen 3 tube, which is most of the price gap. The bare dealer unit is the closer comparison on tube grade, and that is where the mount and arm matter: with ours they are already paid for. For every PVS-14 price on the market, one seller and one date each, see our PVS-14 price guide.

Is a PVS-14 ready to use out of the box?

Almost. Add one AA battery and it works handheld the night it arrives:

  1. Put one 1.5V AA in the battery cap. The page rates it at about 40 hours per cell.
  2. Fit the eyecup, take off the objective cap in a dark room or outdoors at night (never in daylight with the unit on).
  3. Set the diopter (eyepiece) until the tube's picture is sharp for your eye.
  4. Focus the objective (front lens) on what you are looking at.
  5. Use the manual gain knob to set brightness for the scene.

Then run the arrival check inside the 14 day return window: look for spots, edge glow and focus across the view. Our arrival test guide takes about ten minutes.

The PVS-14 from the front, showing the objective lens, tethered cap and the control knobs
The front of the PVS-14: the objective lens you focus, and the knobs on the side for power and gain.

What should you add first?

Add what your nights ask for, in this order:

Related: which sacrificial lens to add to a PVS-14.

  1. AA batteries. Not on the packing list, so buy a pack before the box arrives. Lithium cells hold up better in the cold. More in the night vision battery guide.
  2. A helmet, if you want hands free use. The mount is already in the box, so the helmet is the only big step. Our FAST SF vented helmet is $149.95 (non ballistic) as an add on with the PVS-14.
  3. A counterweight, the first time you wear it for more than an hour on a helmet. See helmet counterweights.
  4. A sacrificial window, if you go through brush or weather, so the scratches land on a small replaceable cover instead of your lens. Our page says the PVS-14 takes standard PVS-14 sacrificial windows.
  5. An IR illuminator, only if you work indoors or under heavy cover with no light at all. See when you need an IR illuminator.

What is worth buying and what to skip is in PVS-14 accessories worth buying, and the helmet build order in the helmet setup guide. What all of this adds up to over ten years is in PVS-14 cost of ownership.

Mistakes to avoid with a new PVS-14 kit

  • Comparing a bare unit's price with a kit's price. Check whether the mount and arm are included.
  • Throwing out the QC sheet with the packaging. Keep it with the unit.
  • Testing it in daylight with the cap off. Bright light ages the tube.
  • Leaving the AA in for weeks between uses.
  • Waiting past 14 days to test it.

Who is the PVS-14 kit for?

Someone who wants analog night vision on a helmet without buying the mount and arm on top. If you already own a helmet and shroud, the kit is complete for you once you add a battery. If you want an IR light and a helmet in the same box and a Gen 3 tube, a dealer helmet kit is the bigger and much higher priced box. If you only want to see at night handheld, the same kit works without the mount at all.

Frequently asked questions

What comes in a PVS-14 kit?

Our PVS-14 kit's packing list is the monocular, a dovetail J-arm, a metal G24-pattern helmet mount, an eyecup and an objective cap, plus a printed QC sheet with your tube's measured numbers. It starts at $1,849.95.

Does a PVS-14 come with a helmet mount?

Ours does: the G24-pattern helmet mount and the J-arm are in the box at every tier. Many dealer PVS-14 listings sell the monocular alone, with the mount and arm sold separately.

What does a dealer PVS-14 kit cost?

It depends on what is in the box. On 5 Nov 2026 the Armasight PVS-14 Gen 3 Pinnacle Premium Kit, with a helmet, a mount and arm, an IR light and a bag, was $5,999.00 on sale at Ironclad Sentry. A bare AGM PVS-14 NW2 was $2,795.00 at Focus Camera.

Is a PVS-14 ready to use out of the box?

Almost. Add one AA battery, fit the eyecup, set the diopter, focus the objective and set the gain, and it works handheld the first night. The AA is not on our packing list, so buy one before the box arrives.

Does the PVS-14 come with a battery?

A battery is not on our product page's packing list. The PVS-14 takes one 1.5V AA and runs about 40 hours on it, so keep a pack of AA cells on hand.

What should you add first?

AA batteries first, then a helmet if you want hands free use (the mount is already in the box), then a counterweight for long helmet sessions, a sacrificial window for brush and weather, and an IR light only for places with no light at all.

Box contents come from our product page's packing list; dealer kit contents and outside prices were read on 5 Nov 2026. Prices change; open the linked page for today's figure.

Helmet ready in one box: the PVS-14, its J-arm, a free G24-pattern helmet mount, an eyecup, a cap and your tube's printed QC sheet, with a 3 month hardware warranty and a 14 day return window. Get the PVS-14 kit from $1,849.95

Retour au blog