Thermal vs Infrared: Are They the Same Thing?

By Night Operators Staff Team
Published: November 5, 2026

Quick answer: No. Infrared is a band of light the human eye cannot see, and "thermal" is one way of using one part of it. Near infrared (just past red) is what IR illuminators emit and what night vision tubes and digital night vision sensors pick up. Long wave infrared (far past red) is heat radiating off every object, and that is what a thermal camera reads. So a thermal monocular is an infrared device, but an "infrared" security camera with a red glow is not thermal, and a night vision tube that sees by starlight is not thermal either. If you want to see warm bodies with no light at all, you want thermal, like our PREDATOR thermal monocular at $749.95.

Three words get used as if they meant one thing: infrared, thermal and night vision. They are related, and the overlap is exactly why people type "thermal vs infrared" and "night vision vs infrared" into a search box before buying anything. This is the vocabulary post. By the end you will know which device each word really points at, what each one can see, and what each one needs to work. If you want the full head to head on buying one or the other, that lives in night vision vs thermal; this post untangles the words first. If you are shopping for something to wear, infrared goggles explained sorts the goggles that carry that label, and heat vision goggles and thermal glasses covers the head worn thermal side.

The PREDATOR thermal monocular with its mounts and spare lens laid out on black
The PREDATOR thermal monocular with its mounts and spare lens laid out.

What is infrared, in plain words?

Infrared is light with a longer wavelength than red. Your eye stops seeing at about 700 nanometres; infrared starts there and runs out to around a millimetre. Nobody sees any of it, but the band is enormous, and different devices work in very different parts of it. The two parts that matter for anyone shopping for night gear are at opposite ends.

Near infrared sits right next to visible red, roughly 700 to 1,000 nanometres. It behaves like ordinary light: it reflects off surfaces, it is blocked by walls, it passes through glass, and it is carried in starlight and moonlight. An IR illuminator is a flashlight that emits here, usually at 850 or 940 nanometres. Night vision tubes and digital camera sensors are sensitive here, which is why they can use it.

Long wave infrared sits far out, around 8,000 to 14,000 nanometres (8 to 14 microns). This is the band in which objects at everyday temperatures glow on their own. A person, a dog, a warm engine, sun warmed rock: all of it radiates here, day and night, with no light source of any kind. A thermal camera is built to read this band, and its sensor is a different kind of part from a camera sensor.

So the one word "infrared" covers both a flashlight you cannot see and the heat coming off your own skin. That is the whole source of the confusion.

Is thermal the same as infrared?

Thermal is infrared, but infrared is not always thermal. A thermal imager is one specific infrared device: it reads long wave heat radiation and draws a picture where brightness or colour stands for temperature difference. The sensor inside is a microbolometer, a grid of tiny elements that warm up slightly when heat lands on them. The PREDATOR uses a 256 by 192 microbolometer with a 25 mK temperature sensitivity, refreshed 60 times a second. How that grid turns heat into an image is covered step by step in how thermal imaging works.

The giveaway on a thermal device is the front lens. Ordinary glass blocks long wave infrared, so a thermal lens cannot be glass. It is germanium, which looks like a dark silver mirror rather than a clear window. If a device has a clear glass objective, it is not thermal, whatever the listing calls it.

The PREDATOR 13 mm germanium thermal lens
The PREDATOR 13 mm distance lens. Thermal lenses are germanium, not glass, because glass blocks heat radiation.

What does an "infrared camera" actually mean?

Usually it means an active near infrared camera, not a thermal one. The security camera on your garage with the ring of faintly red LEDs is an infrared camera in that sense: the LEDs flood the driveway with 850 nanometre light, the sensor sees the reflection, and you get a grey picture of your car. It works only as far as its illuminator reaches, and anyone else with night vision can see that illuminator glowing like a lamp.

Related: handheld thermal camera or thermal monocular: which one fits your job.

Digital night vision monoculars work on the same principle. Our VIPER has a built in 850 nanometre illuminator with a 3 watt output, a true 1x lens with a 45 degree view, and sees effectively to about 100 metres with that light, further with a stronger external illuminator. It is a very good tool for walking, camping, airsoft and watching the yard, at $249.95. It is not thermal, and it will not show you a deer behind a bush, because the bush reflects the IR light just as well as the deer does. Why digital gear leans on an illuminator at all is explained in why digital night vision needs IR.

The VIPER digital night vision monocular on a head strap
The VIPER digital night vision monocular. Its built in 850 nm illuminator is the "infrared" most people mean when they say infrared camera.

Where does analog night vision fit?

The PVS-14 from the front, showing the clear glass objective lens
The PVS-14 objective is clear glass. It gathers starlight and near infrared and feeds a tube that amplifies it; nothing about it is thermal.

An analog night vision tube, the kind inside a PVS-14, is a light amplifier. It takes the faint visible and near infrared light already in the scene, starlight and moonlight and sky glow, and multiplies it thousands of times inside a sealed glass tube. It is passive: it emits nothing. On a clear starlit night a Gen 2+ tube shows you the ground, the tree line and a person at several hundred metres with no illuminator at all. Only in a sealed black room, where there is no light to amplify, does it need an IR illuminator, and then it behaves like the digital camera above.

This is why "night vision vs infrared" is a slightly broken question. A tube uses infrared, the near kind that is already in the night sky, without ever switching an illuminator on. When someone asks whether night vision is "infrared", the honest answer is: it sees near infrared light, but it is not an IR lit camera and it is not thermal.

What does each one see, and when?

Here is the whole vocabulary in one table. Read the "needs" column first: it is the one that decides what you can do on a given night.

Infrared, thermal and night vision: what each one really is
What people call it What it reads What it needs Shows you Fails at
Thermal (PREDATOR, HEAT) Long wave infrared: heat radiating off objects Nothing. Works in total darkness, smoke and light brush Warm bodies, engines, anything warmer or cooler than its background Glass, water surfaces, faces at distance, hot afternoons when ground and body match
IR lit digital night vision (VIPER) Near infrared reflected off the scene Its own illuminator or an external one A grey daylight style picture to the reach of the light, through glass too Range beyond the light, hidden animals, staying unseen by other night vision users
Analog tube night vision (PVS-14) Faint visible and near infrared already in the scene Starlight, moonlight or sky glow; IR only in a sealed dark room Terrain, paths, people and animals in natural detail, no lag Zero light rooms, heavy fog, finding a still animal in cover
"Infrared camera" (security camera) Near infrared reflected off the scene Its own red glow LEDs The driveway, to the reach of the LEDs Everything past the LEDs; it is not thermal

Two rows look alike on purpose. The security camera and the VIPER are the same technology in different bodies. The difference between those two and the thermal row is the whole point of this post: reflected light versus radiated heat.

Our pick: for "see the warm thing with no light at all", the PREDATOR thermal monocular, CORE kit $749.95. A 256 by 192, 25 mK sensor at a true 60 Hz, a 4 mm wide lens in the box, and the 13 mm distance lens swaps on by hand. The 13 mm distance lens is $199.95 on its own or comes in the FULL LOADOUT kit; while the current offer lasts it is free with CORE at checkout (the product page shows today's offer). Early bird orders also get the dual dovetail bridge free while the launch window lasts. Built to order in waves, shipped oldest order first; the product page shows the current shipping window before you pay.

Can thermal see through glass, and can infrared?

Thermal cannot; near infrared can. Glass passes near infrared almost as well as it passes visible light, so an IR lit camera or a night vision tube sees straight through a window or a windshield. Glass blocks long wave infrared, so a thermal imager pointed at a window shows you the window, usually with a faint reflection of your own warm face in it. The same split applies to water: a thermal camera sees the surface, not what is under it. The full list of what heat cannot do is in what thermal cannot do, and it is worth reading before you buy a thermal for a job that needs a window.

Is an infrared thermometer, or a FLIR camera, thermal?

Yes to both. A handheld infrared thermometer reads the same long wave heat radiation as a thermal camera, but from one spot, and gives you a number instead of a picture. That is why it works on a hot pan or a cold window from a distance and needs no light. FLIR started as an acronym, forward looking infrared, and became a brand name for thermal cameras; when people say "a FLIR" they nearly always mean a thermal imager, not an IR lit camera. The quick test from earlier still settles it: a germanium front lens means thermal, a clear glass lens means near infrared.

The reverse catches people out too. An "infrared heater" or an "infrared sauna" warms you with long wave infrared, which is heat, and has nothing to do with seeing. And an "infrared" trail camera is a near infrared camera with LEDs, like the security camera above: it shows what its LEDs light, not what is warm.

Which one works with no light at all?

Thermal only. An analog tube needs some light to amplify, and a digital sensor needs its illuminator, which is itself a light. A thermal sensor needs neither, because a warm body radiates whether or not anything is shining on it. In a basement with the lights off, a cave, or a field on an overcast moonless night, thermal is the only one of the three that shows you a person at 100 metres. The PREDATOR's measured detection with its standard 4 mm lens is about 100 metres for a person and 300 metres for a vehicle; with the 13 mm lens that stretches to about 250 and 600 metres. Why those are detection figures and not identification figures is explained in detection, recognition and identification.

Related: what thermal vision is, explained from scratch.

Which should you buy: thermal, IR lit digital or a tube?

Start from the job, not the word.

  • You want to find living things in the dark (a lost dog, a coyote at the fence, a person on the property): thermal. The PREDATOR at $749.95 if you want swappable lenses, a helmet and clip on ready housing and a 60 Hz picture; the HEAT KIT at $649.95 if you only want a head worn scanner.
  • You want to walk, navigate and see the scene the way your eyes would, and you have some sky light: an analog tube. The PVS-14 from $1,849.95 with a Gen 2+ autogated tube and the G24 mount and J-arm in the box.
  • You want a first night device at the lowest price and you are fine lighting the scene with IR: the VIPER KIT at $249.95.
  • You want both heat and a picture, in one head worn set: the HEAT & VIPER BRIDGE at $749.95 puts the thermal in one eye and IR lit digital night vision in the other, both monoculars and the bridge included, for less than buying them apart. That is the "both" answer for anyone who typed thermal vs infrared and realised they want each for a different job.
The HEAT thermal and VIPER digital night vision monoculars bridged on a head strap
The HEAT & VIPER BRIDGE: thermal in one eye, IR lit digital night vision in the other. Both halves of the "infrared" word on one strap.

Mistakes to avoid

  • Buying an "infrared" camera to find animals. If the listing shows red LEDs and a clear lens, it is an IR lit camera. It shows what the light reaches and nothing hiding in cover. For finding, you want a germanium lens and the word thermal.
  • Expecting thermal to work through a window. It will not. Point it through an open window or step outside.
  • Expecting a night vision tube to be thermal. A tube shows the scene beautifully but a still deer in brush looks like brush. Thermal finds it; the tube tells you what it is. Many owners end up running one of each, which is what the bridge kits are for.
  • Assuming any IR illuminator is invisible. An 850 nm illuminator shows a faint red glow to the naked eye and a bright lamp to anyone else using night vision. 940 nm is dimmer to the eye and shorter in reach. IR illuminators explained covers the trade.
  • Judging thermal on a hot afternoon. When the ground is as warm as the animal, contrast flattens. Nights and cool mornings are where thermal shines, which is also when you will actually use it.

Frequently asked questions

Is thermal imaging the same as infrared?

Thermal imaging is one kind of infrared imaging. It reads long wave infrared, the heat that objects radiate on their own, and needs no light. Other "infrared" devices, such as IR lit security cameras and digital night vision, read near infrared light reflected from an illuminator. Both are infrared; only the first is thermal.

Is night vision infrared?

Analog night vision tubes amplify the faint visible and near infrared light already in a night scene, so they do use infrared, but passively, without an illuminator, and they are not thermal. Digital night vision adds an infrared illuminator to light the scene, which is the active kind of infrared most people picture.

Can thermal see through glass?

No. Glass blocks long wave infrared, so a thermal imager shows the window itself, often with a reflection of your own heat. Near infrared passes through glass, so an IR lit camera or a night vision tube can see through a window.

Does thermal need any light to work?

No. A thermal sensor reads heat radiating from objects, so it works in total darkness, smoke, dust and light brush. It is the only one of the three technologies that shows a warm body with no light of any kind.

Which is better, thermal or infrared night vision?

Neither is better at everything. Thermal is better at finding warm bodies in the dark and in cover. IR lit digital night vision and analog tubes are better at showing the scene, terrain and detail, and at seeing through glass. Many owners run both, with a thermal monocular in one eye and night vision in the other.

How can I tell if a device is thermal?

Look at the front lens. A thermal lens is germanium and looks like a dark silver mirror. A clear glass lens, with or without a ring of red LEDs, means the device reads reflected near infrared light and is not thermal.

What does the PREDATOR thermal monocular see?

With its standard 4 mm lens the PREDATOR detects a person at about 100 metres and a vehicle at about 300 metres in total darkness, the measured figures on its product page. With the 13 mm distance lens that becomes about 250 and 600 metres. It will not see through glass or identify a face at those distances.

Once the words are straight, the choice is usually easy. Reflected light shows you the scene; radiated heat shows you what is alive in it. If the second one is the job, the direct way to get it is our PREDATOR thermal monocular, from $749.95, built to order and shipped oldest order first; while the current offer lasts, the 13 mm distance lens ($199.95 on its own or in the FULL LOADOUT kit) is free with CORE at checkout. Want both views on one head? The HEAT & VIPER BRIDGE at $749.95 is the other door.

Retour au blog